i am instead of my left mix door actuator and the door pivot will not move. How do remove the heater plenum to remove the obstruction, and where is it?


You are watching: 2001 chevy silverado heater core replacement cost

*

Hello, The heater plenum is under the dash. Below is a overview to assist you see what you space in for when doing the job. Girlfriend will should vacuum down and recharge the A/C system.https://www.yellowcomic.com/articles/re-charge-an-air-conditioner-systemStart by disconnecting the battery and draining the coolant from the engine.https://youtu.be/Eqf-H3COtSoandhttps://www.yellowcomic.com/articles/replace-blend-door-motorCheck the end the diagrams below on how the task is done on your truck and also the places of the mix door actuators motorists side is on the bottom passenger dye is top top the top. You re welcome let us know if you need anything rather to obtain the problem fixed.Cheers, Ken
*

*

*

*



See more: How To Copy And Paste In Paint, How To Copy An Image In Ms Paint

great evening, listed below are the step by action instructions v the pictures.Removal Procedure 1. Drain the engine coolant. Refer to Cooling mechanism Draining and also Filling (Vac-N-Fill) Cooling system Draining and also Filling (Static Fill). 2. Utilizing the J 43181 disconnect the inlet heater hose from the heater core. 1. Install the J 43181 to the heater main point pipe. 2. Nearby the tool around the heater main point pipe. 3. Firmly pull the tool right into the quick affix end that the heater hose. 4. Firmly understand the heater hose. Pull the heater hose forward in order come disengage the inlet hose from the heater core. 3. Using the J 43181 disconnect the rise tank outlet water tap from the heater core. 1. Install the J 43181 to the heater main point pipe. 2. Nearby the tool approximately the heater main point pipe. 3. Firmly traction the tool right into the quick connect end the the heater hose. 4. Firmly grasp the heater hose. Traction the heater hose forward in order to disengage the surging tank outlet hose from the heater core. 4. Eliminate the upper intake manifold vision shield. 5. Remove the battery. 6. Eliminate the accumulator. 7. Eliminate the instrument dashboard to the service position. 8. Remove the nuts (2) from the HVAC module (3). 9. Eliminate the bolts (1) from the HVAC module (3). 10. Eliminate the HVAC module (3).