Your product may display screen an error message for a number of reasons, for instance if the battery is low. If you’re suffering an error message, the below images and also descriptions should aid you to recognize the factor why that showing.

You are watching: Accu-chek aviva error code e-9

Blank screen


*

If the meter won’t turn on or has actually a empty display, it will certainly be due to one the the following reasons:

Dead battery – you need to insert a brand-new one.Extreme temperatures – you need to relocate the meter come a an ext temperate area.

Three dashes


*

If you view 3 dashes or hyphens on her display, it method the meter is not coded or the code an essential is no inserted. Turn off the meter and make certain the code an essential is properly inserted. If this go not deal with the problem, please contact yellowcomic.com client Care.

Battery icon


*

The battery icon means the battery strength is low. Adjust the battery soon. Read this post to discover an ext about changing the battery.

“Set-up” ~ above display


*

The indigenous “Set-up" displayed on the screen means the meter is in the set-up mode, wait for you to readjust or confirm settings. Describe Chapter 5, "Using the Set-Up Mode", in your owner"s booklet.

“Set” on display


*

The native "Set" presented on the screen means the meter is in collection mode, wait for friend to readjust or check settings. Refer to Chapter 4, "Meter Setup", in your owner"s booklet.

“Code exp” ~ above display


If you view "code exp" displayed on the screen, it method that the test strips expire at the end of the existing month. Make certain the time and date in the meter are correct. If this go not resolve the problem, please contact yellowcomic.com client Care.

Flashing test strip


If a check strip icon is flashing ~ above the screen, it way that the meter is prepared for you to insert a check strip.

Blood fall icon


If you view a blood drop and test fall on the screen, it means that the meter is prepared for a drop of blood or control solution.

HI in display


If you see the letters HI presented on the screen, her blood glucose might be greater than the measuring selection of the system. Describe Chapter 4, "Unusual Blood Glucose Results", in her owner"s booklet.

LO in display


If you view the letters LO shown on the screen, her blood glucose might be lower than the measuring selection of the system. Describe Chapter 4, "Unusual Blood Glucose Results", in your owner"s booklet.

Asterisk (top of screen) through blood glucose result


A star or asterisk ~ above the height of the display method a marker to be assigned come this check result.

Asterisk (bottom that screen) v blood glucose result


A star or asterisk at the bottom of the display means that the test result was flagged. Refer to Chapter 3, "Flagging check Results", in your owner"s booklet for an ext details.

Exclamation point


An exclamation suggest on the display way blood glucose is listed below the defined hypoglycemic (low blood sugar) level. Describe Chapter 4, "Unusual Blood Glucose Results", in her owner"s booklet.

“Hypo?” top top display


"Hypo?" way blood glucose is below the identified hypo (low blood sugar) level. Refer to Chapter 3, "Understanding her Test Results", in her owner"s booklet.

E-1 message


“E-1” in the display way the test strip may be damaged or the code vital is incorrect. Remove and also reinsert the test strip. If the post reappears, rotate off the meter and make sure the code key is properly inserted. If the blog post reappears, please contact yellowcomic.com client Care.

E-2 message


"E-2" in the display way the code crucial is incorrect. Revolve the meter off and make sure the code key is properly inserted. If this go not settle the problem, please contact yellowcomic.com customer Care.

E-3 message


"E-3" in the display way your blood glucose might be incredibly high or a meter or a test strip error has occurred. The complying with instructions should assist you understand what activity to take:

If her test result matches exactly how you feel, contact your healthcare expert immediately.If her test result does not match how girlfriend feel, repeat the test and also refer to chapter 4, "Unusual Blood Glucose Results", in your owner"s booklet.If the E-3 code still appears for your blood glucose test, your blood glucose result may be extremely high and over the system"s analysis range. Call your healthcare expert immediately.If the 2nd test result does not enhance how girlfriend feel, execute a manage test through the regulate solution and a brand-new test strip.If the control an outcome is within the acceptable range, review the appropriate testing procedure and repeat the blood glucose test v a brand-new test strip.If the control an outcome is no within the agree range, watch Chapter 2, "Understanding Out-of-Range regulate Results."

E-4 message


"E-4" in the display way not sufficient blood or manage solution was drawn into the test strip for measure or was applied after the test has started. Discard the test strip and repeat the test. If the trouble persists, please call yellowcomic.com customer Care.

E-5 message


"E-5" in the display way the code crucial is incorrect or your test strips have expired. Make certain the time and also date in the meter are correct. If the problem persists, please contact yellowcomic.com customer Care.

E-6 message


"E-6" in the display means blood or control solution was used to the check strip prior to the flashing blood fall symbol appeared on the display. Discard the check strip and repeat the test. If the difficulty persists, please contact yellowcomic.com client Care.

E-7 message


"E-7" in the display way an digital error developed or, in rare cases, a supplied test strip was removed and also reinserted. Revolve the meter off and also on or take it the battery the end for 20 seconds and reinsert it. Execute a blood glucose or manage test. If the problem persists, please call yellowcomic.com client Care.

E-8 message


"E-8" in the display means the temperature is over or listed below the proper range for the system. Refer to the test strip package insert for device operating conditions. Move to an area v the suitable conditions, wait 5 minutes, and also repeat the blood glucose or control test. Execute not artificially heat or cool the meter.

E-9 message


"E-9" in the display method the battery is almost out the power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, eliminate the battery, press any kind of meter button, climate reinsert the battery. For further information, and refer to thing 7, "Changing the Battery”, in your owner"s booklet. Alternatively, this short article gives comprehensive information about transforming batteries in yellowcomic.com products.

E-10 message


"E-10" in the display method the time and also date settings might be incorrect. Make certain the time and date room correct and adjust the setups if necessary. For further information, refer to Chapter 5, "Setting the Time and also Date", in her owner"s booklet.

Err through battery icon


"Err" in the display with the battery icon method the battery is practically out the power, so readjust the battery as shortly as you can. For an ext information, refer to Chapter 5, "Changing the Battery", in her owner"s booklet. Alternatively, this short article gives comprehensive information about changing batteries in yellowcomic.com products.

Err through time and date


"Err" in the screen with the time and date means the time and date settings may be incorrect. Make certain the time and date space correct and adjust, if necessary. For much more information, refer to Chapter 4, "Setting the Time and also Date", in her owner"s booklet. Alternatively, this article gives comprehensive information about setting the time and date on her device.

Err with “code” ~ above display


"Err" in the display with words "code" method the code crucial is incorrect. Make sure the code key is appropriately inserted. If this doesn"t settle the problem, please contact yellowcomic.com customer Care.

Err v “code exp” top top display


"Err" in the display with the indigenous "code exp" way the code vital is untrue or your test strips have actually expired. Make certain the code an essential is correctly inserted and check the date on your test strips. If this doesn"t fix the problem, please call yellowcomic.com client Care.

Err with flashing test strip


"Err" in the display screen with a flashing check strip method your blood sugar may be incredibly low, or the check strip might be damaged or not appropriately inserted. If you view this error message after you used blood to the test strip, describe Chapter 3, "Unusual check Results", in your owner"s booklet. If you watch this error message prior to you applied blood to the check strip, eliminate the check strip and reinsert it, or replace it if damaged. If the message reappears, please call yellowcomic.com customer Care.

Err with thermometer icon


"Err" in the screen with a thermometer way the temperature is over or listed below the proper variety for the meter (43°F to 111°F). Relocate to an area between 43°F and also 111°F, wait 5 minutes and repeat the test. Do not artificially heat or cool the meter.

Err v a test strip and blood drop icons


"Err" in the display screen with a test strip and a blood drop way blood or manage solution was applied to the test strip before the flashing blood drop showed up on the display. Discard the test strip and repeat the test.

Err with a blood drop icon


"Err" in the display screen with a blood drop means not sufficient sample was attracted into the test strip for measure or sample was applied after the test has started. Discard the check strip and repeat the test.

Err alone in the display


"Err" through no other information in the display method an error occurred during the test. Discard the test strip and repeat the test. For much more information, refer to Chapter 1, "Understanding Your new System", in her owner"s booklet.

See more: Call Of Duty: Black Ops Iii — Dead Ops Arcade 2 Room Of Fate

EEE in display


"EEE" in the display means an electronic error occurred. Revolve the meter off and also on or take the battery out for a couple of seconds and reinsert it. If the difficulty persists, please call yellowcomic.com client Care.