About: My name is Britt Michelsen. I am a chemical technician from Germany especially interested in computational fluid dynamics. To balance every the theoretical work, I favor to do stuff in my cost-free time an ext About BrittLiv »

You are watching: Feather duster in beauty and the beast

In this instructable, i will display you how to make two different versions of the feather duster from Beauty and also the Beast that can be provided for cleaning.

You might be wonder why ns am not utilizing her name in the title. The problem is the she wasn"t offered a name in the original Disney movie. She is referred to as Marie (in the comics), Babette (in the musical and also House the Mouse), Plumette (in the 2017 live-action remake), and Fifi (in the midquel film Beauty and the Beast: Belle"s miracle World). Even though the prequel is nowhere close to as great as the initial movie, we are going to contact her Fifi in this instructable. Mainly since (in contrast to the various other adaptions) she watch the very same as in the initial movie.

After the town hall Beauty and the Beast for the about hundredth time i felt yes, really inspired and wanted to bring her come life. I absolutely perform not like cleaning and never assumed that a clean utensil could carry me so lot joy, but I for sure love it and hope girlfriend do, too.

So let"s acquire started.


Add TipAsk QuestionCommentDownload



Filament Swiffer (I offered this one) or a smaller ostrich feather duster (like this* one) Optional (for smoothing): Filler primer (e.g. This* one) and also wet sandpaper (e.g. This* one) primer (I used this* one) repaint (white, black, gold, or brass (i offered this* one), red (for the lips), grey, and brown) glue 2 mm thread (at least 16 cm long) complete (+ optional one anti-shine spray paint. Ns am using this* one) Masking tape, once you space going through the feather one


3D press Paintbrushes and optional one airbrush energy knife witnessed (If you are going to usage ostrich feather duster)

* Affiliate link. Ns earn from qualifying purchases. Thanks a lot for the support!

Add TipAsk QuestionCommentDownload

Step 1: The Design


I went into Inkscape (it is a cost-free program, girlfriend can discover it here), added a snapshot from the movie and also one indigenous the head, and also drew the outlines. I likewise scaled the pieces to a dimension that would fit the feathers and also the Swiffer.

There are different programs you deserve to use to revolve the sketch right into a 3D model. I typically use Fusion360. Simply enter the "Design" workspace, choose "INSERT", "Insert SVG", "Insert from mine computer", choose the right record and then choose a plane. Sadly, usually, the component isn"t scaled right.

The Autodesk assist says: "SVG devices are display units, i.e. Pixels. A 1:1 mapping of one SVG file into blend 360 will not be accomplished unless the SVG translator supports mapping logical units (in, mm, cm, etc.) to display screen units (pixel dimensions, which vary on the offered OS and also its version). Even with the units being set in the third-party software, the worths will be converted into points by saving. The dimension of a allude is device-dependent and also application-dependent."

Luckily this can quickly be fixed. Simply measure the imported component by choosing "INSPECT" and also clicking top top the top and bottom lines. Together you deserve to see in the 2nd picture, in my situation it is 32.444 mm. Because it is claimed to be around 123 mm, I should use a scaling variable of about 3.79 (123 mm / 32.444 mm).

Simply click "FINISH SKETCH" (you can delete the later) and reimport the SVG record ("INSERT", "Insert SVG"). Then use the scaling factor in "Scale plane XY" (it may be called differently depending upon the plane you have selected), prefer I am mirroring in the 2nd picture. Before finishing the sketch, girlfriend will have to add a heat in the middle above the sketch and one that goes with the center of the sketch.

Add TipAsk QuestionCommentDownload

Step 3: Finishing the Handle


Add TipAsk QuestionCommentDownload

Step 10: paint the Handle

If girlfriend look at the illustrations of Fifi, you can see that there isn"t any room for the quills of the feathers, which is essential in genuine life. I made decision to paint the bottom the the handle black come hide the it essential to be means longer 보다 in the movie.

Once ns was done airbrushing it and also placed that onto the feathers, ns realized that black color was too dark and also didn"t watch good. So, I had actually to use masking tape again and also went through a dark brown, together you deserve to see in the 3rd picture. I am happy ns repainted it because it looked a many better.

Don"t forget to paint the gold rings.

You don"t should paint the bottom of the Swiffer handle, yet the ring at the top and also the bottom should be painted golden.

Add TipAsk QuestionCommentDownload

Step 11: using the Finish

The mob cap is smoothed the same means as the various other parts. Friend don"t need to worry about its inside since it can"t be seen later (As you deserve to see, mine is still an extremely rough).

Once it is smoothed, just spray repaint it white and also paint the inside of the brim grey, as shown in the very first picture.

In the second picture, you have the right to (once again) check out the difference between a finish without (left) and with (right) an anti-shine layer.

Once the complete is done, reduced the 2 mm thread to a size of about 16 cm. Location it v the holes and also tie a knot on the inside. Make certain that the can"t come loose, since you won"t be able to fix it later. I provided a square knot.

Add TipAsk QuestionCommentDownload

See more: "Hacer": What Does Hago Mean In Spanish Verbs, What Does Hago Mean

Step 13: Glueing

Now all the is left to do is to glue whatever together.

Start through gluing the mob lid to the head, yet be careful because there is a direction and if girlfriend don"t get it right, that won"t be sitting on the head properly.

Next, we room going to adhesive the handle to the head. Together you can see in the third picture, the top and the underside that the Swiffer look different. So, girlfriend will have to decide, i beg your pardon one girlfriend would choose to show. I decided to use the underside together the front. Make certain you keep your decision in mind while gluing the piece together.

As you deserve to see, I provided a many glue to adhesive the feathers to the handle. Make sure that there is enough contact between the glue and also the 3D-printed part.