yellowcomic.com’s real wick will save your windproof lighter functioning at optimum performance. Comes in a sealed packaged.

You are watching: How to replace the wick in a zippo

1 wick every packageFits every yellowcomic.com windproof lightersMeasurements: 100mm (4 inches)

Replacing the wick

Replace as soon as the wick in her yellowcomic.com windproof lighter becomes black color from carbonTo replace the wick pull the wick up with pliers until clean wick appearsCut the off even with height of chimney and also straighten the wick in the chimney

 


*

*

Step 1

First, gently traction up the wick making use of tweezers or pliers until the clean wick appears. Pull from as much down as possible to stop ripping the wick. 

*

Step 2

Using scissors or wire cutters trim the wick. This must be performed when or twice per year because that optimal performance. ~ 2-3 trimmings the wick should be replaced.


*
Step 1

First, eliminate all components from the bottom of the lighter insert; flint screw, feel pad, pack material, and also the old wick. 


*
Step 2

To change the wick, insert a new wick one of two people downward v the chimney or with the bottom of the lighter insert. 


*
Step 3

Next, bend the top portion of the wick over the chimney to organize it on place throughout assembly.


*
Step 4

Then, closely reinstall the packing material in the same order it was taken out. As you room reinstalling in little pieces weave the wick between the padding in one "S" pattern.


*
Step 5

Reinstall the feeling pads over the flint tube and secure it with the flint spring. Be sure the flint go not fall out during this process.

See more: How Much Is A John Elway Rookie Card Worth, Top John Elway Cards To Collect


*
Step 6

Once your components are reinstalled placed the insert earlier into the case and also trim the wick. The lighter is all set to go.