You are watching: John deere lt155 mower deck removal
does anybody the end there understand if there is a method to carry out a mower deck belt adjust on a john deere 42"" liberty 42 mulch only(no side discharge) mower deck there is no removing the mower deck? this is a 1998 used version in very great shape for it"s age, was to run phenomenally before the belt tore from going over a pretty an excellent rut ( new yard didn"t understand it was there) . I have actually the brand-new belt, but the mower blade engage and disengage lever has a tiny brake the comes under on the sheave on peak of the deck and this engage/disengage break is what is in the method of threading this belt end the 3 pulleys. Thought around horsing that on there but don"t want to damages the belt or the pulley brake
After researching and reviewing several docs and videos over there is NO means you deserve to replace your belt without removing the deck. You have the hardest belt to replace with numerous items in the way of gaining the belt out. Below is a good video to aid you easily, safely and quickly remove and replace the belt. This forum refers to this guy"s videos often.
does anybody out there recognize if over there is a way to perform a mower deck belt readjust on a john deere 42"" freedom 42 mulch only(no side discharge) mower deck without removing the mower deck? this is a 1998 used version in very good shape for it"s age, was to run phenomenally prior to the belt tore from going over a pretty good rut ( new yard didn"t understand it to be there) . I have the new belt, yet the mower tongue engage and disengage lever has actually a small brake that comes down on the pulley on optimal of the deck and also this engage/disengage break is what is in the means of threading this belt end the 3 pulleys. Thought about horsing that on there but don"t want to damage the belt or the pulley brake
Flip the pto to the on position, download the belt top top the difficulty pulley climate flip the pto off and install the rest. Open minded it only take a pair minutes to drop the deck and also reinstall it. It looks worse climate it is.
:good2:63 JD 110 w/original 38 mower SN 2701, 87 JD 420 w/Kwikway loader, 03 JD X475 w 54 Mower and also 47 Snowblower
:good2:63 JD 110 w/original 38 mower SN 2701, 87 JD 420 w/Kwikway loader, 03 JD X475 w 54 Mower and 47 Snowblower
the deck has new bolts set up on the 2 rear points of call deck come tractor rather of cotter pins, through front and rear nuts, difficult to get at and also just had actually my socket collection stolen, hard to acquire at with wreches/plyers. Sounds prefer I will need to though. Many thanks for the info and assist guys. Ns picked increase the lt155 because that 600$ and also it operation great. Just had an old stretched /worn belt on it.
jsav , I had a LT155 through a 42" liberty mulching deck for 20 years. Castle are good machines yet I never discovered a way to change the belt there is no dropping the deck. However it"s not as complicated as the seems when you do it a time or two. A native of warning; the timing belt top top the chisels is expensive and also easy to snap in half by hitting any thing almost besides grass or little twigs.
See more: Wh A With A Circle Around It Meaning, Anarchy Symbol
Wayne2013 JD 4520 reduced with Cab & 400X FEL, 1942 LA john Deere, 1946 man Deere series 300 2 disk plow
Thanks Wayne. When you have the deck off, the PTO break as soon as it is in the turn off position offers you more Room to acquire the belt on yet I still do not have sufficient Room to get it previous the break and on the pulley. As soon as you adjust your belt did you need to remove or swivel or pivot that pto break?
Okay again after researching friend still have to drop and remove the deck. The reason being that you have to remove the Black pulley-block Cover and Loosen 2 smaller Pulleys. The 2 smaller sized pulleys have belt guides that are too close come the pulleys which prevent you from rotating the belt approximately the wheel to obtain the belt ago into position. I watched a couple of very bad videos where they do the efforts to changed the deck belt without removing the deck and also they finishing up having to remove the deck. The savvy people all eliminated the deck i m sorry is not difficult or time spend at every so fall the deck and remove it. The will save you time in the long run. As well as you will have the ability to see what the heck you space doing through the deck removed. Once the deck is the end Take a pic of the belt routed prior to removing the old one. Provides life easy as soon as replacing the brand-new on or if the some factor the belt breaks you won"t need to look the up. Right here is a an excellent video because that what requirements needs to be removed and also or loosened.Hope this helps you.