MAINTENANCE RESET: TOYOTA HIGHLANDER

Complete accuse on just how to reset the Oil irradiate & organization Maintenance forced Reminder on Toyota Highlander/Kluger(XU20, XU40, XU50, XU70, HYBRID, LE, LIMITED, SE, XLE) native year 2000-2001-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019-2020.

You are watching: Reset maintenance light toyota highlander 2005

2000-2007 Oil Light/Maint Reqd Reset Toyota Highlander

STEP 1

Turn the Ignition ON. Don’t begin the Engine.

STEP 2

Press the ODO/TRIP BUTTON to display screen to ODO.
*
Oil light Reset guide

*
maintenance compelled reset

STEP 3

Then revolve the IGNITION come OFF.

STEP 4

Press and hold ODO/TRIP BUTTON and turn ignition come the “RUN” position. Host knob because that at the very least 5 seconds until “000000” is displayed.

STEP 5

Then revolve the Ignition OFF. Then rotate the ENGINE ON to verify if the OIL light is reset.If fail Repeat the Procedure.

2005-2006-2007 Maint Reqd Reset Toyota Highlander

STEP 1

Turn the Ignition ON. Don’t start the Engine.

STEP 2

Press the ODO/TRIP BUTTON to display to ODO.
*

STEP 3

Then turn the IGNITION to OFF.

STEP 4

Press and also hold ODO/TRIP BUTTON and turn ignition come the “RUN” position. Hold knob because that at least 5 secs until “MAINT REQD RESET COMPLETED” is displayed.

STEP 5

Then turn the Ignition OFF. Then rotate the ENGINE ON come verify if the MAINT REQD is reset.If fail Repeat the Procedure.

2008-2013 Highlander Maintenance compelled Soon Reset

STEP 1

Turn the Ignition ON. Don’t start the Engine.

STEP 2

Press the ODO/TRIP BUTTON to screen to TRIP A.

STEP 3

Press and hold ODO/TRIP BUTTON and also turn ignition come the “RUN” position. Host knob because that at the very least 5 secs until “RESETTING maintenance DATA COMPLETED” is displayed.

STEP 4

Turn the Ignition OFF. Maintenance reset is complete.

2013-2020 Toyota Landcruiser business Maintenance required Reset

STEP 1

Press The “ENGINE start STOP” switch twice.

STEP 2

Press The ODO/Trip Button To display TRIP A.

STEP 3

Turn The power Off. /Ignition OFF.

STEP 4

While hold TheOdo/Trip Reset Button, push The “ENGINE begin STOP” switch Twice, Don’t relax TheOdo/TripButton, until TheRESETTING maintenance DATA Is Complete.

See more: How To Make A Homemade Airsoft Gun, Pin On Emergency Preparedness

STEP 5

Turn Ignition OFF. Business Maintenance Is Complete.